Google Plus (+1)

• RJ45 jack made from UL94V-0 rated ABS
• 50 gold plating over Nickel in contact area. Tinned lead in soldering area
• complies with both T568A and T568B regulations in the same Jack
• available in both EIA/TIA 568A Category 5e and Category 6 specification

These punch down Keystone RJ45 jacks are available in both EIA/TIA 568A Category 5e and Category 6 specifications, and are made from UL94V-0 rated ABS. The contact area of the jack is made 50 micrometer gold plating over nickel plating, and tinned lead on soldering area. Not only is this product durable and made with the highest quality materials, it also complies with both T568A and T568B regulations in the same jack.

These punch down Keystone jacks come in a variety of colors for your convenience: black, blue, green, gray, red, white, yellow and ivory. All available colors are offered in both the Category 5e and Category 6 specifications. Installing the 110 style punchdown Keystone jack is easy, but requires an impact tool to crimp and connect the wires in place. Start off by stripping the cable to 4 pairs, and follow the directions according to the color-coding sticker to position the wire properly in place. Finish off with a standard impact tool to keep the wires in place and connect them correctly. This keystone jack has a standard rectangular face is held in place with flexible tabs. These special tabs allow the jack to be snapped into a mounting plan’s port. This product can be easily replaced and is interchangeable – a great tool when working with network connections.